【模具资料】最实用模具英语口语交流技巧

-回复 -浏览
楼主 2018-09-06 15:27:48
举报 只看此人 收藏本贴 楼主



昆山国际模具城是“国家火炬计划昆山模具产业基地”核心项目、昆山市特色产业重点项目,被认定为“省级科技企业孵化器”、“江苏省昆山模具科技产业园”、“昆山国际模具城公共交易平台。9年专业运营,已开发土地800余亩,建成面积60余万方,引进模具及相关企业600余家,从业人员10000.

中文1

1)、这套模具资料都清楚了吗?

1、是的,这套模具资料很清楚了;

2、没有,我还有些地方需要和你再确认一下;

3、现在,我们有基本的信息,例如:模穴数,产品材料,注塑机资料和模具材料等,但我们还没有标准件的标准,浇口要求和产品表面要求。

对照1

1) Is everything clear on this mould? ( Anyquestion on this mould? )

--Yes, everything is clear.

--No, I need to confirm some questions with you.

--Now, we have the basic information, such as: cavity number, product material,moulding machine specifications and steel information etc. But we do not havethe standard of spare parts, gate requirements and the surface requirement ofthe part.

中文2

2)、这个产品有没有问题?

1、没有问题,客户很专业;

2、我检查到了以下问题:

A.除了骨位以外,大部分都加了拨模角。它不会影响模具结构;

B.没加拨模角。我没有办法确认产品的分型面和模具结构。

对照2

2) Any question on this product?

--No. Our customer is very professional.

--I found the following problems after checking it:

A. The draft angle is almost added exceptfor some ribs. It will not affect the mould structure.

B. No draft angle on the part. We can notconfirm the parting line and the mould construction.

中文3

3)、模具有没有薄钢位?

1、有,这里就有薄钢位, 模具强度会受影响;

2、我仔细检查了产品的3D图,没有看到薄钢位,我如果以后发现了,我会立即告诉你。

对照3

3) Are there any weak steel (thin steel)areas on the mould?

1. Yes, Here is weak steel. Mould strengthwill be effected.

2. I have checked 3D part drawingscarefully, no weak steel. I will let you know if I find it later.

中文4

4)、注塑后,产品会不会有缩水现象?

1、应当没有,产品壁厚挺均匀的,产品可能会有轻微缩水;

2、这个产品设计的壁厚不均匀,特别是这些柱位和骨位太厚了,缩水痕很明显。产品是外观件,我们强烈建议客户修改产品;

对照4

4) After injection, will there be any sinkmarks on the part?

1. Should not have. The wall thickness iseven. The part might have slight sink marks.

2. The part wall thickness is uneven,especially these ribs & bosses are too thick. The sink mark will be veryvisible. It is a cosmetic part. We strongly suggest customer to modify thepart.

中文5

5)、注塑后,产品会不会变形?

1、应当不会变形,产品挺简单的;

2、很有可能会变形。产品又长又薄,很容易变形。需告诉诉客户这事。

3、产品是平板件,很容易变形。我们需要找到一个合适的浇口位置;

对照5

5) Will there be any deformation on thepart?

1.No, the part is quite simple.

2.Possible. The part is very long and thin, very easy to be deformed ( warpage).Please inform customer about this.

3.The part is flat, easy to be deformed. We need to find a suitable gatelocation.

阅读本文用了:秒,转发只需1秒!

❀感谢您关注“昆山国际模具城” 转载、分享更给力!


我要推荐
转发到